Wiring reference for
linking Caution-Mode terminals
and Hot power wires MUST be
wired correctly. Accidentally reversing the Hot and Neutral
on ANY of the linked boards may result in damage to multiple
boards. All wiring must be done with power REMOVED from all
boards to avoid electric shock.
Linking the CAUTION MODE input
If you want all the boards to go into caution mode at the same time,
the CAUTION MODE INPUTS must be linked as well. This only
requires a single wire from board to board that connects the screw
right next to the LINK IN screw. See reference pictures below.
The link and caution connections are very low current, so any size wire
will work as long as the WIRE INSULATION is rated for 130 volts or