[BACK]
Wiring
reference for linking multiple boards.
WARNING! Neutral
and Hot power wires MUST be
wired correctly. Accidentally reversing the Hot and Neutral
on ANY of the linked boards may result in damage to multiple
boards. All wiring must be done with power REMOVED from all
boards to avoid electric shock.
To link boards simply connect a wire from the LINK OUT to the next
boards LINK IN. When you get to the last board, connect a wire
from it's LINK OUT to the first boards LINK IN. This creates an
IN/OUT loop from the first board to the last board.
Wire Size:
The link and caution connections are very low current, so any size wire
will work as long as the WIRE INSULATION is rated for 130 volts or
higher.
[BACK]