[BACK]

Wiring reference for  a SELF-LINKED board

WARNING!  Neutral and Hot power wires MUST be wired correctly.  Accidentally reversing the Hot and Neutral on ANY of the linked boards may result in damage to multiple boards.  All wiring must be done with power REMOVED from all boards to avoid electric shock.

Wire Size:
The link and caution connections are very low current, so any size wire will work as long as the WIRE INSULATION is rated for 130 volts or higher.

When using a single board, simply connect the  LINK IN terminal to the LINK OUT terminal.  A 1 inch piece of 22 awg stranded wire with stripped ends would suffice, although just about any INSULATED wire will work.

[BACK]