<--BACK
SYNC 5 Main Description Page-->
Wiring
reference for a signal and pedestrian Walk/Don't-walk
light. Light
Sequence
description.
Warning:
ALWAYS double
check your wiring before powering up boards, especially the AC INPUT
HOT/NEUTRAL connector. Tripple check that your HOT and
NEUTRAL
power wires are not reversed. Improper wiring WILL result in
damage to the board. [contact]
MOUNTING:
The
Circuit board mounts with the four holes located in each corner, and
should be mounted away from any metal surface by at least 1/4".
Aluminum
stand-offs are recommended.
Click here for the PDF wiring
diagram with
linking example and operating instructions.
Click here for the PDF wiring
diagram with
linking example and operating instructions.
Free counters provided by Andale.