Joezgarage Support Page
(work in progress)

Troubleshooting aid for voltage measurements and ohm readings (PDF)

How to change out the Control IC (Firmware upgrade)

FAQ Page


One of the lights stays on all the time Shorted triac.  
Typical causes:
An output shorted to the common terminal
Attempt to drive too many bulbs exceeding the output capacity.
Surge caused by failing bulb causing over current condition.
Board is dead. Possible causes:
Blown fuse.
Input resistor or main capacitor failed due to modified voltage intput (i.e. Dimmer or Modified Sine-Wave inverter, etc...)

For Repairs, please contact us for a "Return Merchandise Authorization" first, and then
ship item(s) to:

P.O. Box 39156
Downey, CA 90239-0156
Attn. Repair Dept.

Include a printout of at least one email message(s) with  and also include a print-out or clearly-hand-printed  return address where item(s) are to be shipped back.
Return shipping is via USPS Priority mail and should be paid via PAYPAL .  Click appropriate button below to purchase return shipping and be sure to enter you return shipping info.

Out of Warranty repair including  shipping ( $25)  

Return shipping only ($9):